Plastics?? - plastics & gallstones
How do I fill the plastic binder, plasticizer and other additives in the formation of plastic aid. Is there a relationship between certain measures to form a sculpture?
Saturday, December 12, 2009
Plastics & Gallstones Plastics??
Subscribe to:
Post Comments (Atom)
2 comments:
Powder - Generally, an inert material, plastic, make it less expensive. The addition of fillers in the general properties reduces the amount depends article.The final properties of the final product and cost.
Binders - In general, a resin containing a substance that is added to the plastic in the paint (resin) with other ingredients to make it together (for example, pigments, etc.) hold (which, among other reasons.
Plasticizers - Added to all aid to the formation of a continuous film, as in the color (usually referred to as coalescent), or the plastic support will be flexible.
There are many steps. To a large extent, dependent on demand. A degree of flexibility, hardness, color, impact resistance, UV resistance, abrasion resistance, clarity, strength, elasticity, resistance, etc.
Another area where action in the field of manufacturing is necessary. Some of them are the viscosity, temperature, gloss, drying time, humidity, etc.
Other additives short
Pigments for color
Solvent for the requestEffects of cations
Waxes to allow treatment
And so on.
This is a good question, if you need something specific, please let me know
Powder - Generally, an inert material, plastic, make it less expensive. The addition of fillers in the general properties reduces the amount depends article.The final properties of the final product and cost.
Binders - In general, a resin containing a substance that is added to the plastic in the paint (resin) with other ingredients to make it together (for example, pigments, etc.) hold (which, among other reasons.
Plasticizers - Added to all aid to the formation of a continuous film, as in the color (usually referred to as coalescent), or the plastic support will be flexible.
There are many steps. To a large extent, dependent on demand. A degree of flexibility, hardness, color, impact resistance, UV resistance, abrasion resistance, clarity, strength, elasticity, resistance, etc.
Another area where action in the field of manufacturing is necessary. Some of them are the viscosity, temperature, gloss, drying time, humidity, etc.
Other additives short
Pigments for color
Solvent for the requestEffects of cations
Waxes to allow treatment
And so on.
This is a good question, if you need something specific, please let me know
Post a Comment